Dunams to Square Inches (dunam to in²)

1 dunam equals 1,550,003.1 square inches (rounded).

1 dunam = 1,550,003.1 square inches

How to convert dunams to square inches

To convert dunams to square inches, multiply the number of dunams by 1,550,003.1. The factor is rounded to 10 significant digits. To go the other way, multiply square inches by 6.4516×10⁻⁷.

square inches = dunams × 1,550,003.1

Example: 10 dunams = 15,500,031 square inches.

About these units

Dunam (dunam)

Middle EasternTraditional unit (still used in some regions)

Exactly 1,000 m² in the modern metric standard. Older Ottoman dunams varied by region, from about 900 to 2,500 m².

Ottoman Turkish dönmek means to turn, and the dunam probably follows the Byzantine Greek stremma, a land measure of similar size. Its legal definition was forty standard paces in length and breadth, but the real area differed from province to province, from just over 900 square meters in Ottoman Palestine to about 2,500 in Ottoman Iraq. Roughly it matched the land an ox team could plough in a day.

Today the metric dunam is standardised at exactly 1,000 square meters, a tenth of a hectare, and that is the figure used here. It is the working unit in Israel, Palestine, Syria, Iraq and Turkey, and the Balkan dunam is mostly the same, with local exceptions such as about 1,600 square meters around Leskovac in Serbia. Under the British Mandate the dunam was 919.3 square meters until the metric version was adopted in 1928. Cyprus lists its donum at 1,338 square meters, and the old Ottoman stremma in Greece is given as about 1,270.

1 dunam = 1,000 square meters (exactly).

Sources: Wikipedia: Dunam

Square Inch (in²)

US & ImperialCurrent unit

A square one inch on a side, exactly 6.4516 cm². Used for small parts and for pressure (pounds per square inch).

Latin uncia, one twelfth, gave English the inch, which Old English borrowed as ynce. A statute of Edward II in 1324 defined it as three barleycorns, dry and round, set end to end, and the barleycorn remained the base for centuries after 1066. The modern square inch rests on a 20th-century agreement: the United States adopted a yard of exactly 0.9144 meter on 1 July 1959, the United Kingdom followed effective 1 January 1964, and the inch became exactly 25.4 mm.

Squaring that gives exactly 6.4516 cm² for one square inch, and one square meter is about 1,550 of them. Its best-known descendant is the pound per square inch, psi, the pressure unit still used for American tires and air tanks: atmospheric pressure at sea level is about 14.7 psi, a car tire is typically inflated to around 32 psi above the surrounding air, and one psi is about 6.895 kilopascals. The square inch itself is common in the US and UK for small parts and printed material.

1 square inch = 0.00064516 square meters (exactly).

Sources: Wikipedia: Square inch; Wikipedia: Inch; Wikipedia: Pounds per square inch

Related conversions

See all area units.