Acres to Ares (ac to a)

1 acre equals 40.46856422 ares (rounded).

1 acre = 40.46856422 ares

How to convert acres to ares

To convert acres to ares, multiply the number of acres by 40.46856422. The factor is rounded to 10 significant digits. To go the other way, multiply ares by 0.02471053815 (rounded).

ares = acres × 40.46856422

Example: 10 acres = 404.6856422 ares.

About these units

Acre (ac)

US & ImperialCurrent unit

43,560 square feet or exactly 4,046.8564224 m², about 40% of a hectare. Originally the area a yoke of oxen could plow in a day.

Ploughland gave the acre its name: it traces to Old Norse akr, meaning cultivated land, and is related to German Acker and Latin ager. In medieval England it was a farming measure, the land one man with a team of eight oxen could plough in a day. The traditional strip was 40 perches long and 4 perches wide, which is 660 by 66 feet, or ten square chains. The shape was never the point, and the article on the unit stresses that any area of 43,560 square feet is an acre.

An acre is 43,560 square feet, 4,840 square yards or 1/640 of a square mile, close to 0.4 hectare. For Americans, it is roughly 88 by 55 yards, about 90 percent of a football field without the end zones. The Weights and Measures Act 1878 fixed it at 4,840 square yards in Britain, where trade use ended in 1995. The 1959 international acre is exactly 4,046.8564224 m²; the US survey acre, about 4,046.872 m², differed slightly, and US survey units were retired after 2022.

1 acre = 4,046.856422 square meters (approximately).

Sources: Wikipedia: Acre; NIST Guide to the SI, Appendix B.8: conversion factors

Are (a)

Metric (SI)Traditional unit (still used in some regions)

100 square meters, a square 10 m on a side. Mostly replaced by the hectare (100 ares).

Latin area, meaning an open piece of ground, gave French the word are, the base land unit of the metric system. A French law of 1795 defined it as 100 square meters, a square ten meters on each side, and the hectare was then built as 100 ares, which is why that familiar unit carries the "hecto-" prefix.

The are itself never made it into the modern SI when the system was rationalised in 1960, and the hectare took over for fields, forests and planning. The are survives mostly as a convenience for small plots such as building lots and gardens, and in everyday talk in parts of continental Europe. NIST lists it as exactly 100 square meters, so the figure used here is firm, and 100 ares make one hectare. The hectare is about 2.47 acres, so an are is roughly a fortieth of an acre.

1 are = 100 square meters (exactly).

Sources: Wikipedia: Hectare; NIST SP 811, Appendix B.8 conversion factors

Related conversions

See all area units.