Liters to Homers (L to homer)

1 liter equals 0.004545454545 homers (rounded).

1 liter = 0.004545454545 homers

How to convert liters to homers

To convert liters to homers, multiply the number of liters by 0.004545454545. The factor is rounded to 10 significant digits. To go the other way, multiply homers by 220.

homers = liters × 0.004545454545

Example: 10 liters = 0.04545454545 homers.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

Approximate value. Standards for the homer varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Liter (L)

Metric (SI)Current unit

One cubic decimeter (1,000 cm³). The everyday metric unit of volume for drinks, fuel and cooking.

The liter was born in revolutionary France. In 1795 it was introduced as a republican unit and defined as one cubic decimeter, while the gram was tied to a cubic centimeter of water. The name comes from the older French litron, itself descended from a Byzantine Greek unit of weight, not volume. A small revision of the decimeter in 1798 left the first liter about 1.000974 of today's cubic decimeter, and in 1879 the international metric authorities adopted the liter with the symbol l.

The liter then took a strange detour. In 1901 it was redefined as the space taken up by one kilogram of pure water at its densest, which made it about 1.000028 cubic decimeters, and that muddled definition lasted until 1964, when it was restored to exactly one cubic decimeter. A capital L was added as an alternative symbol in 1979 because a lowercase l is easy to mistake for the digit 1, and NIST says L is the symbol to use in the United States. A liter of water is close to a kilogram, which is why a one-liter bottle feels like a kilo in the hand.

The liter is the reference unit for volume on this site.

Sources: Wikipedia: Litre; NIST Guide to the SI, Chapter 5: units outside the SI

Homer (homer)

Biblical (Hebrew)Historical unit (no longer in standard use)Approximate value

Ten baths, roughly 220 L. The largest biblical dry and liquid measure.

Largest of the common biblical capacity measures, the homer, also called the kor, served for bulk grain and for liquids such as oil. Ezekiel states that the ephah and the bath were each a tenth of it, and rabbinic tables put it at ten ephah, or thirty seah. It is also easy to mix up with the omer, a unit more than a hundred times smaller despite the similar spelling in English.

Reference works usually quote about 220 litres, which follows directly from ten baths of 22 litres each. That figure is only as firm as the bath estimate beneath it, so a homer should be taken as a rough order of magnitude rather than an exact capacity. For comparison, 220 litres is a little more than a standard 200 litre oil drum, so a homer was in effect a large cask or a heavy load of grain.

1 homer = 220 liters (approximately).

Sources: Wikipedia: Homer (unit); Wikipedia: Bath (unit); Wikipedia: Biblical and Talmudic units of measurement

Related conversions

See all volume units.