Microseconds to Minutes (µs to min)

1 microsecond equals 1.666666667×10⁻⁸ minutes (rounded).

1 microsecond = 1.666666667×10⁻⁸ minutes

How to convert microseconds to minutes

To convert microseconds to minutes, multiply the number of microseconds by 1.666666667×10⁻⁸. The factor is rounded to 10 significant digits. To go the other way, multiply minutes by 60,000,000.

minutes = microseconds × 1.666666667×10⁻⁸

Example: 10 microseconds = 1.666666667×10⁻⁷ minutes.

Months and years are not constant. This site uses the average Gregorian year of 365.2425 days, so one 'year' converts to 365.2425 days, not 365; use 'common year' for exactly 365 days.

About these units

Microsecond (µs)

Metric (SI)Current unit

One millionth of a second. Used for electronics and processor timing.

Writing a microsecond takes a Greek letter, mu, which stands for the prefix micro-, one millionth. Where plain text cannot display it, people fall back on the letter u and write us. The unit belongs to electronics and radio: a signal that repeats every microsecond has a frequency of 1 MHz, and a radio wave of that period is about 300 m long.

A microsecond is one millionth of a second, short enough that light in a vacuum crosses only about 1 km in 3.34 of them. Digital audio lives on this scale, because a CD sample at 44.1 kHz lasts about 22.7 microseconds and a 48 kHz sample about 20.8. A modern solid-state drive has an access latency of about 50 microseconds, and a camera flash lasts around 1,000. Relativity matters at this scale too: GPS satellite clocks would drift by about 38 microseconds per day without compensation. Wikipedia notes that the 2011 Japanese earthquake shortened the day by about 1.8 microseconds.

1 microsecond = 0.000001 seconds (exactly).

Sources: Wikipedia: Microsecond; BIPM: SI Brochure, 9th edition

Minute (min)

Metric (SI)Current unit

60 seconds. Defined as one sixtieth of an hour.

Minute means small, not short. It comes from the Latin pars minuta prima, the first small part, produced when sixty-based division was applied to the hour. Al-Biruni is credited with dividing the hour into minutes, seconds, thirds and fourths around the year 1000, and Roger Bacon used the same scheme in 1267. For everyday life the minute needed hardware: Jost Bürgi is said to have made the first clock with a minute hand, for Tycho Brahe in 1577, and watches got minute hands only after Thomas Tompion's hairspring of 1675 made them accurate enough.

A minute is 60 seconds, exactly 1/60 of an hour, and the BIPM's SI Brochure is the reference for its symbol, min. Civil timekeeping can bend the rule: because of leap seconds, a UTC minute occasionally holds 61 seconds. A negative leap second would produce a 59-second minute, but that has never happened in more than 40 years. People use the minute for cooking, lectures and phone calls, and the same name serves for the arcminute, which is a sixtieth of a degree.

1 minute = 60 seconds (exactly).

Sources: Wikipedia: Minute; BIPM: SI Brochure, 9th edition; NIST: the second and the SI redefinition

Related conversions

See all time units.