Yards to Khet (yd to khet)

1 yard equals 0.01741714286 khet (rounded).

1 yard = 0.01741714286 khet

How to convert yards to khet

To convert yards to khet, multiply the number of yards by 0.01741714286. The factor is rounded to 10 significant digits. To go the other way, multiply khet by 57.41469816 (rounded).

khet = yards × 0.01741714286

Example: 10 yards = 0.1741714286 khet.

Approximate value. Standards for the khet varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Yard (yd)

US & ImperialCurrent unit

3 feet or 36 inches, exactly 0.9144 meters. Used for sports fields, fabric and short distances in the US and UK.

Yard descends from the Old English gerd or gyrd, meaning a branch, stave or measuring rod. It first appears in the late seventh-century laws of Ine of Wessex, though there it names a tax unit, the yardland. Around 959 to 963 King Edgar ordered that the measure held at Winchester be used throughout his realm, the earliest record of a prototype. A story that Henry I fixed the yard as the distance from his nose to his thumb is later folklore, and the true origin, whether pace, cubit or waist, remains speculative.

Britain defined the Imperial Standard Yard in 1824 as the distance between two marks on a brass rod at 62 degrees Fahrenheit. A fire in 1834 damaged the standard, a replacement was made in 1845, and the Weights and Measures Act 1855 recognized it. The 1959 international agreement then fixed the yard at exactly 0.9144 meter. Today it measures American and Canadian football fields, association football pitches and cricket pitches, appears on UK road signs for short distances, and is still used to sell fabric in the US and UK.

1 yard = 0.9144 meters (exactly).

Sources: Wikipedia: Yard; Wikipedia: Inch; NIST Guide to the SI, Appendix B.8: conversion factors

Khet (khet)

Ancient EgyptianHistorical unit (no longer in standard use)Approximate value

One hundred royal cubits, about 52.5 m. A land-surveying measure laid out with a knotted cord.

Land in Egypt had to be measured again and again, because the annual Nile flood erased boundaries, and the khet belonged to that work. It is usually explained as a length of 100 royal cubits, measured with a cord or rope marked by knots at regular intervals, a technique shown in tomb scenes such as that of Menna at Thebes. With a cubit of 52.5 cm, one khet comes to about 52.5 m, though cubit rods vary, so the true length could be a metre or so either way.

Usage is not entirely uniform. Wikipedia's article on Egyptian units lists the 100-cubit cord under a different name and gives khet as another label for a short rod of about 60 cm, so the term is read in more than one way by modern authors. In area work the khet is the side of a square, and one square khet is the setat, about 2,760 square metres at this size. The khet is about 52 m, or roughly 57 yards.

1 khet = 52.5 meters (approximately).

Sources: Wikipedia: Ancient Egyptian units of measurement; Wikipedia: Cubit

Related conversions

See all length units.