Wa (Thai) to Millimeters (wa to mm)

1 wa (Thai) equals 2,000 millimeters exactly.

1 wa (Thai) = 2,000 millimeters

How to convert wa (Thai) to millimeters

To convert wa (Thai) to millimeters, multiply the number of wa (Thai) by 2,000. This factor is exact. To go the other way, multiply millimeters by 0.0005.

millimeters = wa (Thai) × 2,000

Example: 10 wa (Thai) = 20,000 millimeters.

About these units

Wa (Thai) (wa)

ThaiTraditional unit (still used in some regions)

Exactly 2 meters, the Thai fathom. Used in land measurement alongside the rai.

Wa is the Thai fathom, a length of 2 meters. It belongs to a traditional Thai scale built on the human body, in which the khuep (span) is 25 cm, the sok (cubit) is 50 cm, and four sok make one wa, the span of outstretched arms.

Larger distances were counted in the sen, which is 20 wa, and the long road measure yot, equal to 400 sen. Surveyors working on the Royal Thai Survey Department cadastral survey, begun in 1896, tied these units to metric lengths, and the wa kept the round value of 2 m that it carries today.

Because the metric figure is exact, the old body-based uncertainty has gone. A wa still appears in land deeds and frontage descriptions, and in daily speech a plot may be described as so many wa wide. It is also the side of the square wa, which is 4 square meters.

1 wa (Thai) = 2 meters (exactly).

Sources: Wikipedia: Thai units of measurement; Wikipedia: Rai (unit)

Millimeter (mm)

Metric (SI)Current unit

One thousandth of a meter. Used in engineering, manufacturing and rainfall measurement.

Carl Friedrich Gauss put the millimeter at the base of his 1832 proposal for absolute units, pairing it with the milligram and the second, although the centimeter-based CGS system later won out among scientists. The name combines the metric prefix milli-, from the Latin for one thousand, with the meter. Since 1983 a millimeter has been tied to the speed of light: it is the distance light covers in 1/299,792,458,000 of a second.

Millimeters are the language of fine mechanical work. Standard rulers are divided into them, digital calipers commonly read to 0.01 mm, and mechanical pencil leads come in 0.5 and 0.7 mm. Copy paper is about 0.1 mm thick, and a thin hair, at 0.02 to 0.04 mm across, is close to the smallest thing the naked eye can see. A wave with a frequency of 300 GHz has a wavelength of 1 mm. An inch is exactly 25.4 mm. One trap for readers in the United States is that mil there traditionally means a thousandth of an inch, not a millimeter.

1 millimeter = 0.001 meters (exactly).

Sources: Wikipedia: Millimetre; Wikipedia: Centimetre-gram-second system of units; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.