Roman Cubits to Yards (cubitum to yd)

1 Roman cubit equals 0.4855643045 yards (rounded).

1 Roman cubit = 0.4855643045 yards

How to convert Roman cubits to yards

To convert Roman cubits to yards, multiply the number of Roman cubits by 0.4855643045. The factor is rounded to 10 significant digits. To go the other way, multiply yards by 2.059459459 (rounded).

yards = Roman cubits × 0.4855643045

Example: 10 Roman cubits = 4.855643045 yards.

Approximate value. Standards for the Roman cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Roman Cubit (cubitum)

Ancient RomanHistorical unit (no longer in standard use)Approximate value

One and a half Roman feet, about 44.4 cm.

Cubitum was the Latin word for elbow, and it came from a verb meaning to lie down or recline, the root of the English cubit. Roman writers such as Vitruvius defined it as one and a half Roman feet, or six palm widths, which gives about 444 mm. That is the figure used here. It was meant to span roughly the length of the forearm from the elbow to the fingertips.

Compared with other ancient cubits it was short. The Egyptian royal cubit survives on rods measuring about 523 to 529 mm, and Wikipedia says ancient cubits generally ranged from about 44.4 to 52.9 cm, so the Roman one sits at the bottom of that range. Romans also used a separate, longer ulna of about 120 cm. In a modern setting the Roman cubit is a little over 17 inches.

1 Roman cubit = 0.444 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ancient Roman units of measurement

Yard (yd)

US & ImperialCurrent unit

3 feet or 36 inches, exactly 0.9144 meters. Used for sports fields, fabric and short distances in the US and UK.

Yard descends from the Old English gerd or gyrd, meaning a branch, stave or measuring rod. It first appears in the late seventh-century laws of Ine of Wessex, though there it names a tax unit, the yardland. Around 959 to 963 King Edgar ordered that the measure held at Winchester be used throughout his realm, the earliest record of a prototype. A story that Henry I fixed the yard as the distance from his nose to his thumb is later folklore, and the true origin, whether pace, cubit or waist, remains speculative.

Britain defined the Imperial Standard Yard in 1824 as the distance between two marks on a brass rod at 62 degrees Fahrenheit. A fire in 1834 damaged the standard, a replacement was made in 1845, and the Weights and Measures Act 1855 recognized it. The 1959 international agreement then fixed the yard at exactly 0.9144 meter. Today it measures American and Canadian football fields, association football pitches and cricket pitches, appears on UK road signs for short distances, and is still used to sell fabric in the US and UK.

1 yard = 0.9144 meters (exactly).

Sources: Wikipedia: Yard; Wikipedia: Inch; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.