Picometers to Millimeters (pm to mm)

1 picometer equals 1×10⁻⁹ millimeters exactly.

1 picometer = 1×10⁻⁹ millimeters

How to convert picometers to millimeters

To convert picometers to millimeters, multiply the number of picometers by 1×10⁻⁹. This factor is exact. To go the other way, multiply millimeters by 1,000,000,000.

millimeters = picometers × 1×10⁻⁹

Example: 10 picometers = 1×10⁻⁸ millimeters.

About these units

Picometer (pm)

Metric (SI)Current unit

One trillionth of a meter. Atomic diameters are typically a few hundred pm.

One trillionth of a meter, the picometer (pm) is the SI length that sits below the nanometer and above the femtometer. It equals 0.01 angstrom, so a figure in angstroms converts by multiplying by 100. Wikipedia notes that the symbol mu-mu was once used for it, and the NIST list of SI prefixes gives pico as 10 to the power of minus 12.

In practice the unit belongs to chemistry and atomic physics, where distances between bonded atoms are expressed as a few hundred of them. A carbon to carbon single bond is about 154 pm long, and a helium atom is estimated at about 62 pm across, while atoms in general run from roughly 62 to 520 pm in diameter. Chemists who grew up with the angstrom increasingly quote the same distances in picometers, because the angstrom is no longer part of the SI. Gravitational-wave work pushes the scale further: the planned LISA detector is expected to resolve displacements of about 20 pm over a 2.5 million kilometer baseline.

1 picometer = 1×10⁻¹² meters (exactly).

Sources: Wikipedia: Picometre; NIST: metric (SI) prefixes; Wikipedia: Angstrom

Millimeter (mm)

Metric (SI)Current unit

One thousandth of a meter. Used in engineering, manufacturing and rainfall measurement.

Carl Friedrich Gauss put the millimeter at the base of his 1832 proposal for absolute units, pairing it with the milligram and the second, although the centimeter-based CGS system later won out among scientists. The name combines the metric prefix milli-, from the Latin for one thousand, with the meter. Since 1983 a millimeter has been tied to the speed of light: it is the distance light covers in 1/299,792,458,000 of a second.

Millimeters are the language of fine mechanical work. Standard rulers are divided into them, digital calipers commonly read to 0.01 mm, and mechanical pencil leads come in 0.5 and 0.7 mm. Copy paper is about 0.1 mm thick, and a thin hair, at 0.02 to 0.04 mm across, is close to the smallest thing the naked eye can see. A wave with a frequency of 300 GHz has a wavelength of 1 mm. An inch is exactly 25.4 mm. One trap for readers in the United States is that mil there traditionally means a thousandth of an inch, not a millimeter.

1 millimeter = 0.001 meters (exactly).

Sources: Wikipedia: Millimetre; Wikipedia: Centimetre-gram-second system of units; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.