Nautical Leagues to Inches (nlea to in)

1 nautical league equals 218,740.1575 inches (rounded).

1 nautical league = 218,740.1575 inches

How to convert nautical leagues to inches

To convert nautical leagues to inches, multiply the number of nautical leagues by 218,740.1575. The factor is rounded to 10 significant digits. To go the other way, multiply inches by 0.000004571634269 (rounded).

inches = nautical leagues × 218,740.1575

Example: 10 nautical leagues = 2,187,401.575 inches.

About these units

Nautical League (nlea)

NauticalHistorical unit (no longer in standard use)

Three nautical miles (5.556 km). Used at sea; the title of Jules Verne's novel counts distance in these.

Jules Verne's 1870 novel title promises twenty thousand leagues beneath the sea, a number that would circle the planet several times over, and the unit behind it is worth unpacking. Leagues descend from a Celtic measure that Rome took over as the leuga, supposedly about what a person could walk in an hour. Seafaring nations later adapted the word to the water, where distance was reckoned from the sea rather than from the road.

At sea, English usage made a league three nautical miles. With the international nautical mile fixed at exactly 1,852 m by a hydrographic conference at Monaco in 1929, that gives 5,556 m, the figure used here, or 5.556 km. It equals thirty cables and covers three minutes of latitude. Earlier national nautical miles differed a little, and Portugal and Spain defined maritime leagues from fractions of a degree of meridian, so values near 5.5 to 6.2 km turn up in older texts. Verne's league was a French unit, a metric one of 4,000 m having been legal in France from 1812 to 1840, and the nautical league is now only historical.

1 nautical league = 5,556 meters (exactly).

Sources: Wikipedia: League (unit); Wikipedia: Nautical mile

Inch (in)

US & ImperialCurrent unit

1/12 of a foot. Defined as exactly 25.4 millimeters since 1959, when the US and Commonwealth countries agreed a common international inch.

Latin uncia, meaning one-twelfth, is the root of both inch and ounce, and it passed into Old English as ynce. Roman measurers divided their foot into twelve unciae, and the English inch kept that twelfth. After 1066 an inch was reckoned as three barleycorns, and a 1324 statute attributed to Edward II spelled out the definition as three grains of barley, dry and round, placed end to end lengthwise. For centuries the inch was simply a twelfth of a foot, or a thirty-sixth of a yard, and the US and UK each kept their own copy of the standard yard.

Those copies differed slightly until the 1959 international agreement fixed the yard at exactly 0.9144 meter, which made the inch exactly 25.4 millimeters. The US adopted it in 1959 and the UK ratified it in 1963, effective 1964. Today the inch is still the customary unit in the United States and Canada, and the UK keeps it on road signs. Worldwide it also names display diagonals, wheel rims, tire codes and pipe sizes.

1 inch = 0.0254 meters (exactly).

Sources: Wikipedia: Inch; Wikipedia: Yard; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.