Inches to Hands (in to hh)

1 inch equals 0.25 hands exactly.

1 inch = 0.25 hands

How to convert inches to hands

To convert inches to hands, multiply the number of inches by 0.25. This factor is exact. To go the other way, multiply hands by 4.

hands = inches × 0.25

Example: 10 inches = 2.5 hands.

About these units

Inch (in)

US & ImperialCurrent unit

1/12 of a foot. Defined as exactly 25.4 millimeters since 1959, when the US and Commonwealth countries agreed a common international inch.

Latin uncia, meaning one-twelfth, is the root of both inch and ounce, and it passed into Old English as ynce. Roman measurers divided their foot into twelve unciae, and the English inch kept that twelfth. After 1066 an inch was reckoned as three barleycorns, and a 1324 statute attributed to Edward II spelled out the definition as three grains of barley, dry and round, placed end to end lengthwise. For centuries the inch was simply a twelfth of a foot, or a thirty-sixth of a yard, and the US and UK each kept their own copy of the standard yard.

Those copies differed slightly until the 1959 international agreement fixed the yard at exactly 0.9144 meter, which made the inch exactly 25.4 millimeters. The US adopted it in 1959 and the UK ratified it in 1963, effective 1964. Today the inch is still the customary unit in the United States and Canada, and the UK keeps it on road signs. Worldwide it also names display diagonals, wheel rims, tire codes and pipe sizes.

1 inch = 0.0254 meters (exactly).

Sources: Wikipedia: Inch; Wikipedia: Yard; NIST Guide to the SI, Appendix B.8: conversion factors

Hand (hh)

US & ImperialTraditional unit (still used in some regions)

Exactly 4 inches (10.16 cm). Used almost only to measure the height of horses at the withers.

Horse people still say a mare stands fifteen hands, and the word is the same Old English hand that names the body part. The unit was first the breadth of a hand, with or without the thumb, or the height of a clenched fist, and the figure varied from person to person. Ancient Egyptian cubit-rods show a comparable hand of five digits, roughly 94 mm. In England, a Horses Act of 1540 under Henry VIII fixed the hand at four inches, and some later dictionaries still muddled it with the three-inch handsbreadth.

The figure used here is exactly 4 inches, or 10.16 cm. Fractions are counted in inches, not tenths, so a height written 15.2 means fifteen hands and two inches, which is 62 inches, and 15.3 is followed directly by 16.0. The height is taken at the withers, the ridge between the shoulder blades. The unit survives for horses and ponies in the United States, Canada, the United Kingdom, Ireland, Australia and New Zealand, while continental Europe and international equestrian competition use metric.

1 hand = 0.1016 meters (exactly).

Sources: Wikipedia: Hand (unit); Wiktionary: hand

Related conversions

See all length units.