Feet to Wa (Thai) (ft to wa)

1 foot equals 0.1524 wa (Thai) exactly.

1 foot = 0.1524 wa (Thai)

How to convert feet to wa (Thai)

To convert feet to wa (Thai), multiply the number of feet by 0.1524. This factor is exact. To go the other way, multiply wa (Thai) by 6.56167979 (rounded).

wa (Thai) = feet × 0.1524

Example: 10 feet = 1.524 wa (Thai).

About these units

Foot (ft)

US & ImperialCurrent unit

12 inches. Defined as exactly 0.3048 meters. Still the standard unit for height, altitude in aviation and room dimensions in the US and UK.

Human anatomy supplied the idea: an adult foot is roughly 15 percent of body height. Ancient cultures turned that into standards, but not the same one. The Greek pous was about 302 mm, the standard Roman pes about 295.7 mm, and a Harappan foot of about 335 mm has been reported from the Indus Valley. Historically, a foot fell somewhere between about 250 and 335 mm. Charlemagne tried to standardize units around 790 with little lasting success, and in 1593 English law fixed the statute mile at 5,280 feet.

The modern foot dates from the 1959 International Yard and Pound Agreement, which defined the yard as exactly 0.9144 meter and so the foot as exactly 0.3048 meter; the UK adopted it on 1 January 1964. The US survey foot, defined in 1893 as 1200/3937 meter, was deprecated on 31 December 2022. Feet remain in everyday use for height and rooms in the US, and ISO shipping containers are defined in them. Aviation altitudes use them too: flight level 330 means 33,000 feet.

1 foot = 0.3048 meters (exactly).

Sources: Wikipedia: Foot (unit); Wikipedia: Mile; NIST Guide to the SI, Appendix B.8: conversion factors

Wa (Thai) (wa)

ThaiTraditional unit (still used in some regions)

Exactly 2 meters, the Thai fathom. Used in land measurement alongside the rai.

Wa is the Thai fathom, a length of 2 meters. It belongs to a traditional Thai scale built on the human body, in which the khuep (span) is 25 cm, the sok (cubit) is 50 cm, and four sok make one wa, the span of outstretched arms.

Larger distances were counted in the sen, which is 20 wa, and the long road measure yot, equal to 400 sen. Surveyors working on the Royal Thai Survey Department cadastral survey, begun in 1896, tied these units to metric lengths, and the wa kept the round value of 2 m that it carries today.

Because the metric figure is exact, the old body-based uncertainty has gone. A wa still appears in land deeds and frontage descriptions, and in daily speech a plot may be described as so many wa wide. It is also the side of the square wa, which is 4 square meters.

1 wa (Thai) = 2 meters (exactly).

Sources: Wikipedia: Thai units of measurement; Wikipedia: Rai (unit)

Related conversions

See all length units.