Gigabytes to Petabytes (GB to PB)
1 gigabyte equals 0.000001 petabytes exactly.
How to convert gigabytes to petabytes
To convert gigabytes to petabytes, multiply the number of gigabytes by 0.000001. This factor is exact. To go the other way, multiply petabytes by 1,000,000.
petabytes = gigabytes × 0.000001
Example: 10 gigabytes = 0.00001 petabytes.
Decimal prefixes (kB, MB, GB) are powers of 1,000; binary prefixes (KiB, MiB, GiB) are powers of 1,024. Storage makers use decimal; Windows reports binary but labels it GB.
About these units
Gigabyte (GB)
1,000,000,000 bytes (decimal). Storage manufacturers and phone makers use this definition.
The gigabyte is where the decimal-versus-binary dispute turned into lawsuits. Drive makers advertise capacity in decimal units, so a 500 GB drive holds 500 billion bytes, but Windows reports sizes in binary units and shows about 465.7 of what it labels GB for the same drive. Early challenges against Western Digital and Seagate were settled, with Western Digital adding disclaimers that usable capacity may differ from the advertised figure.
A 2019 lawsuit was decided in the manufacturers' favor, with the court relying on the decimal definition. For scale, one gigabyte holds roughly an hour of standard-definition video at 2.2 Mbit/s. A single-layer DVD+R holds about 4.7 GB and a single-layer Blu-ray about 25 GB. RAM is still often sized in binary gigabytes, which the IEC would call gibibytes.
1 gigabyte = 1,000,000,000 bytes (exactly).
Sources: Wikipedia: Gigabyte; Wikipedia: Binary prefix; Wikipedia: Gibibyte
Petabyte (PB)
1,000 terabytes (10¹⁵ bytes). The scale of large data centers.
Peta entered the SI in 1975, when the General Conference on Weights and Measures approved peta and exa in its Resolution 10. A petabyte is 10 to the fifteenth bytes, or 1,000 terabytes, and the word is formed by attaching that prefix to byte, a term Werner Buchholz coined in June 1956 as a deliberate respelling of bite. The binary counterpart is the pebibyte: the IEC amendment published in January 1999 added pebi and exbi to the earlier binary names.
Decimal units dominate at this size: hard drives, SSDs, optical discs and network contracts all use powers of 1,000, and macOS, iOS, Android and Ubuntu follow suit. As an example of the size, one petabyte is about 2,000 years of MP3-encoded music at roughly one megabyte per minute. Binary use of the P symbol is less common than for smaller prefixes.
1 petabyte = 1×10¹⁵ bytes (exactly).
Sources: Wikipedia: Petabyte; BIPM: SI prefixes; Wikipedia: Binary prefix
Related conversions
- Petabytes to gigabytes (reverse)
- Gigabytes to bytes
- Gigabytes to kilobytes
- Gigabytes to megabytes
- Gigabytes to terabytes
- Gigabytes to bits
- Gigabytes to kibibytes
- Gigabytes to mebibytes
- Gigabytes to gibibytes
- Gigabytes to tebibytes
- Gigabytes to kilobits
- Gigabytes to megabits
- Gigabytes to gigabits
- Bytes to petabytes
- Kilobytes to petabytes
- Megabytes to petabytes
- Terabytes to petabytes
- Bits to petabytes
- Kibibytes to petabytes
- Mebibytes to petabytes
- Gibibytes to petabytes
- Tebibytes to petabytes
- Kilobits to petabytes
- Megabits to petabytes
- Gigabits to petabytes
See all digital storage units.