Gigabits to Petabytes (Gb to PB)

1 gigabit equals 1.25×10⁻⁷ petabytes exactly.

1 gigabit = 1.25×10⁻⁷ petabytes

How to convert gigabits to petabytes

To convert gigabits to petabytes, multiply the number of gigabits by 1.25×10⁻⁷. This factor is exact. To go the other way, multiply petabytes by 8,000,000.

petabytes = gigabits × 1.25×10⁻⁷

Example: 10 gigabits = 0.00000125 petabytes.

Decimal prefixes (kB, MB, GB) are powers of 1,000; binary prefixes (KiB, MiB, GiB) are powers of 1,024. Storage makers use decimal; Windows reports binary but labels it GB.

About these units

Gigabit (Gb)

ComputingCurrent unit

1,000,000,000 bits (125 MB).

Gigabit is one billion bits, or 125 million bytes. In the IEC notation it is written Gbit, while IEEE 1541-2002 recommends Gb, which may be confused with GB for gigabyte. The binary counterpart, the gibibit, is 2 to the thirtieth bits. Network links and fiber are usually rated in gigabits per second, because data transfer rates are measured in decimal SI multiples.

Memory is where gigabits and binary habits collide. Chip capacity is often given in binary multiples using the ambiguous G prefix rather than the IEC Gi, so a DRAM chip advertised as 1 GB has 2 to the thirtieth bytes. The Wikipedia article on the bit says this was still causing difficulty for software designers as of 2022. When you see a gigabit rate, divide by eight for gigabytes per second.

1 gigabit = 125,000,000 bytes (exactly).

Sources: Wikipedia: Gigabit; Wikipedia: Bit

Petabyte (PB)

ComputingCurrent unit

1,000 terabytes (10¹⁵ bytes). The scale of large data centers.

Peta entered the SI in 1975, when the General Conference on Weights and Measures approved peta and exa in its Resolution 10. A petabyte is 10 to the fifteenth bytes, or 1,000 terabytes, and the word is formed by attaching that prefix to byte, a term Werner Buchholz coined in June 1956 as a deliberate respelling of bite. The binary counterpart is the pebibyte: the IEC amendment published in January 1999 added pebi and exbi to the earlier binary names.

Decimal units dominate at this size: hard drives, SSDs, optical discs and network contracts all use powers of 1,000, and macOS, iOS, Android and Ubuntu follow suit. As an example of the size, one petabyte is about 2,000 years of MP3-encoded music at roughly one megabyte per minute. Binary use of the P symbol is less common than for smaller prefixes.

1 petabyte = 1×10¹⁵ bytes (exactly).

Sources: Wikipedia: Petabyte; BIPM: SI prefixes; Wikipedia: Binary prefix

Related conversions

See all digital storage units.