Bytes to Terabytes (B to TB)
1 byte equals 1×10⁻¹² terabytes exactly.
How to convert bytes to terabytes
To convert bytes to terabytes, multiply the number of bytes by 1×10⁻¹². This factor is exact. To go the other way, multiply terabytes by 1,000,000,000,000.
terabytes = bytes × 1×10⁻¹²
Example: 10 bytes = 1×10⁻¹¹ terabytes.
Decimal prefixes (kB, MB, GB) are powers of 1,000; binary prefixes (KiB, MiB, GiB) are powers of 1,024. Storage makers use decimal; Windows reports binary but labels it GB.
About these units
Byte (B)
Eight bits. The basic addressable unit of memory and storage.
Werner Buchholz coined the word byte in June 1956 while working on the IBM Stretch computer; the earliest supporting document is dated 11 June 1956. He respelled bite on purpose, in his words to avoid accidental mutation to bit. At that stage a byte was any group of one to six bits, and a move to eight bits was considered in August 1956 and built into the design soon after. Louis Dooley later claimed he had coined the term around 1956 or 1957 on the SAGE project at MIT Lincoln Laboratory, where it meant groups of four bits, but Fred Brooks credited Buchholz.
IBM's System/360 adopted the eight-bit byte, and its success made that size the standard. The symbol is a capital B, and the unambiguous alternative is octet, a word used in protocol standards such as RFC 791. A byte can hold 256 distinct values, enough for a letter of the alphabet in a simple character set, which is why files and memory addresses are counted in bytes.
The byte is the reference unit for digital storage on this site.
Sources: Wikipedia: Byte; Wikipedia: Binary prefix
Terabyte (TB)
1,000 gigabytes (10¹² bytes), the capacity of a typical modern hard drive.
Tera comes from the SI prefix for 10 to the twelfth, so a terabyte is one million million bytes. Computer memory is binary, so the prefixes were once used for powers of two, which caused confusion. IUPAC proposed binary prefixes such as kibi, mebi and gibi in 1995, and the IEC adopted them in December 1998 and published the standard in January 1999. The tebibyte is the binary counterpart, about 9 percent larger than the terabyte.
Hitachi introduced the first one-terabyte consumer hard drive in 2007. For scale, one terabyte is about 20 standard Blu-ray discs or 213 DVDs. The mismatch shows at this size: a drive sold as 1 TB may be reported as about 931 GB, because Windows uses the historic binary convention. macOS and iOS did the same until Mac OS X 10.5 Leopard and iOS 10, then switched to powers of 10.
1 terabyte = 1,000,000,000,000 bytes (exactly).
Sources: Wikipedia: Terabyte; Wikipedia: Binary prefix; NIST: Prefixes for binary multiples
Related conversions
- Terabytes to bytes (reverse)
- Bytes to kilobytes
- Bytes to megabytes
- Bytes to gigabytes
- Bytes to bits
- Bytes to petabytes
- Bytes to kibibytes
- Bytes to mebibytes
- Bytes to gibibytes
- Bytes to tebibytes
- Bytes to kilobits
- Bytes to megabits
- Bytes to gigabits
- Kilobytes to terabytes
- Megabytes to terabytes
- Gigabytes to terabytes
- Bits to terabytes
- Petabytes to terabytes
- Kibibytes to terabytes
- Mebibytes to terabytes
- Gibibytes to terabytes
- Tebibytes to terabytes
- Kilobits to terabytes
- Megabits to terabytes
- Gigabits to terabytes
See all digital storage units.