US Survey Acres to Square Inches (ac (US) to in²)

1 US survey acre equals 6,272,665.091 square inches (rounded).

1 US survey acre = 6,272,665.091 square inches

How to convert US survey acres to square inches

To convert US survey acres to square inches, multiply the number of US survey acres by 6,272,665.091. The factor is rounded to 10 significant digits. To go the other way, multiply square inches by 1.594218702×10⁻⁷ (rounded).

square inches = US survey acres × 6,272,665.091

Example: 10 US survey acres = 62,726,650.91 square inches.

About these units

US Survey Acre (ac (US))

US land surveyHistorical unit (no longer in standard use)

43,560 square US survey feet (about 4,046.873 m²), slightly larger than the international acre. Used in US land records until 2022.

Two acres existed side by side in the United States for decades, separated by a tiny difference in the definition of the foot. Both contain 43,560 square feet, but the international acre uses the foot fixed in 1959 from a yard of exactly 0.9144 meter, giving 4,046.8564224 square meters. The survey acre keeps the older relation set by the 1893 Mendenhall Order, in which one meter is exactly 39.37 inches, giving about 4,046.873 square meters.

The gap is only about 0.016 square meter, roughly 160 square centimeters, but across a large state it adds up to real discrepancies, which is why surveyors held on to the old figure for land records. In October 2019 the National Geodetic Survey and NIST announced that the temporary continued use of the survey foot, mile and acre would end at the close of 2022, and the international units are meant to replace them. The acre itself began as the land a farmer with oxen could plough in a day, and its name comes from an Old Norse word for cultivated land.

1 US survey acre = 4,046.87261 square meters (approximately).

Sources: Wikipedia: Acre; NIST SP 811 Appendix B.8 (conversion factors)

Square Inch (in²)

US & ImperialCurrent unit

A square one inch on a side, exactly 6.4516 cm². Used for small parts and for pressure (pounds per square inch).

Latin uncia, one twelfth, gave English the inch, which Old English borrowed as ynce. A statute of Edward II in 1324 defined it as three barleycorns, dry and round, set end to end, and the barleycorn remained the base for centuries after 1066. The modern square inch rests on a 20th-century agreement: the United States adopted a yard of exactly 0.9144 meter on 1 July 1959, the United Kingdom followed effective 1 January 1964, and the inch became exactly 25.4 mm.

Squaring that gives exactly 6.4516 cm² for one square inch, and one square meter is about 1,550 of them. Its best-known descendant is the pound per square inch, psi, the pressure unit still used for American tires and air tanks: atmospheric pressure at sea level is about 14.7 psi, a car tire is typically inflated to around 32 psi above the surrounding air, and one psi is about 6.895 kilopascals. The square inch itself is common in the US and UK for small parts and printed material.

1 square inch = 0.00064516 square meters (exactly).

Sources: Wikipedia: Square inch; Wikipedia: Inch; Wikipedia: Pounds per square inch

Related conversions

See all area units.