Sections to Square Meters (section to m²)
1 section equals 2,589,998.47 square meters (rounded).
How to convert sections to square meters
To convert sections to square meters, multiply the number of sections by 2,589,998.47. The factor is rounded to 10 significant digits. To go the other way, multiply square meters by 3.861006141×10⁻⁷ (rounded).
square meters = sections × 2,589,998.47
Example: 10 sections = 25,899,984.7 square meters.
About these units
Section (section)
One square US survey mile (640 acres). The basic unit of the US Public Land Survey System.
Under the Land Ordinance of 1785, territory outside the existing states could not be sold or settled until it had been surveyed, and the basic parcel of that grid was the section: a square mile, about 2.6 square kilometers, holding 640 acres. Thirty-six of them make a township. Numbering runs back and forth in a snaking pattern, starting with section 1 in the northeast corner and ending with section 36 in the southeast.
Sections were meant to be cut into smaller pieces. A quarter section is 160 acres, and the Homestead Act of 1862 let a settler claim that amount after living on it and improving it for five years. Quarter-quarters of 40 acres are still used in legal descriptions. Section 16 was set aside to fund local schools, and in several western states section 36 was added too. In practice few sections are perfect squares, because the curve of the Earth, compass errors and rough terrain bent the lines, and the original survey monuments still take legal precedence over later measurement.
1 section = 2,589,998.47 square meters (approximately).
Sources: Wikipedia: Section (United States land surveying); Wikipedia: Public Land Survey System
Square Meter (m²)
The SI unit of area: a square one meter on each side. Used for floor areas and property sizes in most of the world.
Squaring the meter was built into the metric system from the start. The French law of 18 Germinal, Year III (7 April 1795) defined the are, the land unit that gave the hectare its name, as exactly 100 square meters, so the square meter was already the foundation of metric land measure. Nobody is credited with inventing it as a separate unit. It is simply the area of a square one meter on each side, and any SI prefix that works for the meter works for it, with the prefix squared along with the unit.
That squaring catches people out: a square kilometer is one million square meters, not one thousand. Since 1983 the meter has been defined through the speed of light, so the square meter is tied to a constant of nature as well as to the second. A hectare, about the area of Trafalgar Square in London, is 10,000 square meters. In everyday terms one square meter is about 10.76 square feet. Unicode has a compatibility character for it, but the recommended way to write it is the plain superscript two: m².
The square meter is the reference unit for area on this site.
Sources: Wikipedia: Square metre; Wikipedia: Are (unit); NIST: the meter and the SI redefinition
Related conversions
- Square meters to sections (reverse)
- Sections to square kilometers
- Sections to hectares
- Sections to square inches
- Sections to square feet
- Sections to square yards
- Sections to acres
- Sections to square miles
- Square kilometers to square meters
- Hectares to square meters
- Square inches to square meters
- Square feet to square meters
- Square yards to square meters
- Acres to square meters
- Square miles to square meters
- Square centimeters to square meters
- Square millimeters to square meters
- Tsubo to square meters
- Pyeong to square meters
- Rai (Thai) to square meters
See all area units.