Pyeong to Square Centimeters (py to cm²)

1 pyeong equals 33,057.85124 square centimeters (rounded).

1 pyeong = 33,057.85124 square centimeters

How to convert pyeong to square centimeters

To convert pyeong to square centimeters, multiply the number of pyeong by 33,057.85124. The factor is rounded to 10 significant digits. To go the other way, multiply square centimeters by 0.00003025.

square centimeters = pyeong × 33,057.85124

Example: 10 pyeong = 330,578.5124 square centimeters.

About these units

Pyeong (py)

KoreanTraditional unit (still used in some regions)

Exactly 400/121 m² (3.3058 m²), the Korean unit equivalent to the Japanese tsubo and the Taiwanese ping. Still used informally for apartment sizes in Korea and Taiwan.

Floor space in South Korea is still often quoted in pyeong, a word that, like the Japanese tsubo and Taiwanese ping, stands for a square whose side is one kan or bu, equal to 36 square Chinese or Japanese feet. The Korean version was fixed during the Japanese occupation at 400/121 square meters, about 3.3058 square meters, which is roughly the area of two tatami mats.

Korean sources use the pyeong as the standard traditional measure for homes. Typical benchmarks are about 25 pyeong for an average house and 8 to 12 for a studio flat. Official use was banned in 1961, but the ban had little effect until commercial use was criminalised from 1 July 2007, after which listings show square meters with the pyeong figure as an informal extra. Taiwan introduced the ping under Japanese rule and still uses it, at about 3.305 square meters. Wikipedia notes that a Chinese version based on metric feet would be near 4 square meters but is almost unknown.

1 pyeong = 3.305785124 square meters (approximately).

Sources: Wikipedia: Pyeong

Square Centimeter (cm²)

Metric (SI)Current unit

A square one centimeter on a side; 1/10,000 of a square meter.

Physicists, rather than surveyors, put the centimeter at the center of a measuring system. Carl Friedrich Gauss proposed absolute units based on length, mass and time in 1832, choosing the millimeter, and in 1873 a British Association committee including James Clerk Maxwell and William Thomson (Lord Kelvin) recommended the centimeter, gram and second instead. In that CGS system the square centimeter turns up inside derived units, such as the stokes of kinematic viscosity, defined as one square centimeter per second.

A square centimeter is one ten-thousandth of a square meter, so 10,000 of them fill a square meter. It is a natural size for small flat things: a square inch is exactly 6.4516 cm², and a square foot is exactly 929.0304 cm². Because the CGS system defined force and pressure with the centimeter, the dyne per square centimeter became its unit of pressure, called the barye, which equals 0.1 pascal. SI practice prefers the square meter for large areas and the square millimeter for very small ones.

1 square centimeter = 0.0001 square meters (exactly).

Sources: Wikipedia: Centimetre-gram-second system of units; Wikipedia: Square centimetre; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all area units.