Hectares to Townships (ha to twp)

1 hectare equals 0.0001072501706 townships (rounded).

1 hectare = 0.0001072501706 townships

How to convert hectares to townships

To convert hectares to townships, multiply the number of hectares by 0.0001072501706. The factor is rounded to 10 significant digits. To go the other way, multiply townships by 9,323.994493 (rounded).

townships = hectares × 0.0001072501706

Example: 10 hectares = 0.001072501706 townships.

About these units

Hectare (ha)

Metric (SI)Current unit

10,000 square meters (2.471 acres). The standard unit for land and agricultural areas outside the US.

Hecto plus are: the name was coined in French, and are itself comes from the Latin area, meaning an open space. The French law of 18 Germinal, Year III (7 April 1795) defined the are as 100 square meters, and the hectare followed as 100 ares, or 10,000 square meters. The unit is therefore a product of the original French metric reforms rather than of later SI work, which is one reason its official status has always been slightly awkward.

When the SI was set up in 1960 the are was not recognized, and the hectare was classed as a non-SI unit accepted for use with it. In practice it is the standard unit for land ownership, planning and agriculture in the European Union, the United Kingdom, Canada, Australia, New Zealand and South Africa, while the United States and Myanmar stay with the acre. A hectare is a square 100 meters on each side, about the size of Trafalgar Square, and equals roughly 2.47 acres. One hundred of them make a square kilometer.

1 hectare = 10,000 square meters (exactly).

Sources: Wikipedia: Hectare; Wikipedia: Are (unit); NIST Guide to the SI, Appendix B.8: conversion factors

Township (twp)

US land surveyTraditional unit (still used in some regions)

36 sections: a square 6 survey miles on a side (23,040 acres). Used in US land records.

Western descriptions of land such as T2N, R3E refer to townships in the survey sense: a block six miles on a side, nominally 36 square miles or 23,040 acres. T counts six-mile steps north or south of a baseline, while R counts six-mile steps east or west of a principal meridian. Each region's grid hangs from an initial point where the two meet, and one meridian can serve several states, as the Willamette Meridian does for Oregon and Washington.

Meridians converge toward the pole, so townships would shrink to the north if nothing were done. Surveyors therefore laid standard parallels, commonly every 24 or 30 miles, to reset the width. The first lands laid out this way were the Seven Ranges in eastern Ohio, and Jefferson is credited with promoting the system to support a country of independent farmers. A survey township is distinct from a civil township, which is a unit of local government in about 20 states and may follow the survey lines or ignore them.

1 township = 93,239,944.93 square meters (approximately).

Sources: Wikipedia: Township (United States); Wikipedia: Public Land Survey System

Related conversions

See all area units.