Acres to US Survey Acres (ac to ac (US))

1 acre equals 0.999996 US survey acres (rounded).

1 acre = 0.999996 US survey acres

How to convert acres to US survey acres

To convert acres to US survey acres, multiply the number of acres by 0.999996. The factor is rounded to 10 significant digits. To go the other way, multiply US survey acres by 1.000004 (rounded).

US survey acres = acres × 0.999996

Example: 10 acres = 9.99996 US survey acres.

About these units

Acre (ac)

US & ImperialCurrent unit

43,560 square feet or exactly 4,046.8564224 m², about 40% of a hectare. Originally the area a yoke of oxen could plow in a day.

Ploughland gave the acre its name: it traces to Old Norse akr, meaning cultivated land, and is related to German Acker and Latin ager. In medieval England it was a farming measure, the land one man with a team of eight oxen could plough in a day. The traditional strip was 40 perches long and 4 perches wide, which is 660 by 66 feet, or ten square chains. The shape was never the point, and the article on the unit stresses that any area of 43,560 square feet is an acre.

An acre is 43,560 square feet, 4,840 square yards or 1/640 of a square mile, close to 0.4 hectare. For Americans, it is roughly 88 by 55 yards, about 90 percent of a football field without the end zones. The Weights and Measures Act 1878 fixed it at 4,840 square yards in Britain, where trade use ended in 1995. The 1959 international acre is exactly 4,046.8564224 m²; the US survey acre, about 4,046.872 m², differed slightly, and US survey units were retired after 2022.

1 acre = 4,046.856422 square meters (approximately).

Sources: Wikipedia: Acre; NIST Guide to the SI, Appendix B.8: conversion factors

US Survey Acre (ac (US))

US land surveyHistorical unit (no longer in standard use)

43,560 square US survey feet (about 4,046.873 m²), slightly larger than the international acre. Used in US land records until 2022.

Two acres existed side by side in the United States for decades, separated by a tiny difference in the definition of the foot. Both contain 43,560 square feet, but the international acre uses the foot fixed in 1959 from a yard of exactly 0.9144 meter, giving 4,046.8564224 square meters. The survey acre keeps the older relation set by the 1893 Mendenhall Order, in which one meter is exactly 39.37 inches, giving about 4,046.873 square meters.

The gap is only about 0.016 square meter, roughly 160 square centimeters, but across a large state it adds up to real discrepancies, which is why surveyors held on to the old figure for land records. In October 2019 the National Geodetic Survey and NIST announced that the temporary continued use of the survey foot, mile and acre would end at the close of 2022, and the international units are meant to replace them. The acre itself began as the land a farmer with oxen could plough in a day, and its name comes from an Old Norse word for cultivated land.

1 US survey acre = 4,046.87261 square meters (approximately).

Sources: Wikipedia: Acre; NIST SP 811 Appendix B.8 (conversion factors)

Related conversions

See all area units.