Acres to Sections (ac to section)

1 acre equals 0.00156249375 sections (rounded).

1 acre = 0.00156249375 sections

How to convert acres to sections

To convert acres to sections, multiply the number of acres by 0.00156249375. The factor is rounded to 10 significant digits. To go the other way, multiply sections by 640.00256 (rounded).

sections = acres × 0.00156249375

Example: 10 acres = 0.0156249375 sections.

About these units

Acre (ac)

US & ImperialCurrent unit

43,560 square feet or exactly 4,046.8564224 m², about 40% of a hectare. Originally the area a yoke of oxen could plow in a day.

Ploughland gave the acre its name: it traces to Old Norse akr, meaning cultivated land, and is related to German Acker and Latin ager. In medieval England it was a farming measure, the land one man with a team of eight oxen could plough in a day. The traditional strip was 40 perches long and 4 perches wide, which is 660 by 66 feet, or ten square chains. The shape was never the point, and the article on the unit stresses that any area of 43,560 square feet is an acre.

An acre is 43,560 square feet, 4,840 square yards or 1/640 of a square mile, close to 0.4 hectare. For Americans, it is roughly 88 by 55 yards, about 90 percent of a football field without the end zones. The Weights and Measures Act 1878 fixed it at 4,840 square yards in Britain, where trade use ended in 1995. The 1959 international acre is exactly 4,046.8564224 m²; the US survey acre, about 4,046.872 m², differed slightly, and US survey units were retired after 2022.

1 acre = 4,046.856422 square meters (approximately).

Sources: Wikipedia: Acre; NIST Guide to the SI, Appendix B.8: conversion factors

Section (section)

US land surveyTraditional unit (still used in some regions)

One square US survey mile (640 acres). The basic unit of the US Public Land Survey System.

Under the Land Ordinance of 1785, territory outside the existing states could not be sold or settled until it had been surveyed, and the basic parcel of that grid was the section: a square mile, about 2.6 square kilometers, holding 640 acres. Thirty-six of them make a township. Numbering runs back and forth in a snaking pattern, starting with section 1 in the northeast corner and ending with section 36 in the southeast.

Sections were meant to be cut into smaller pieces. A quarter section is 160 acres, and the Homestead Act of 1862 let a settler claim that amount after living on it and improving it for five years. Quarter-quarters of 40 acres are still used in legal descriptions. Section 16 was set aside to fund local schools, and in several western states section 36 was added too. In practice few sections are perfect squares, because the curve of the Earth, compass errors and rough terrain bent the lines, and the original survey monuments still take legal precedence over later measurement.

1 section = 2,589,998.47 square meters (approximately).

Sources: Wikipedia: Section (United States land surveying); Wikipedia: Public Land Survey System

Related conversions

See all area units.