Bps to MiB/s (bit/s to MiB/s)

1 bit per second equals 1.192092896×10⁻⁷ mebibytes per second (rounded).

1 bit per second = 1.192092896×10⁻⁷ mebibytes per second

How to convert bits per second to mebibytes per second

To convert bits per second to mebibytes per second, multiply the number of bits per second by 1.192092896×10⁻⁷. The factor is rounded to 10 significant digits. To go the other way, multiply mebibytes per second by 8,388,608.

mebibytes per second = bits per second × 1.192092896×10⁻⁷

Example: 10 bits per second = 0.000001192092896 mebibytes per second.

Network speeds are quoted in bits per second (lowercase b), while file sizes use bytes (uppercase B). Divide Mbps by 8 for MB/s.

About these units

Bit Per Second (bit/s)

ComputingCurrent unit

The basic unit of data rate: one bit transferred each second.

Before there was a bit per second, there had to be a bit. The word is a contraction of binary digit, and John W. Tukey is credited with shortening it in a Bell Labs memo dated 9 January 1947. Claude Shannon then used it in print in his 1948 paper on the mathematical theory of communication, where he credited Tukey. Counting such bits against the clock gave engineers a way to compare telegraph lines, telephone circuits and computer links with one yardstick.

Today the bit per second is the base unit for data rates, written bit/s and often shortened to bps. It is not the same thing as the baud, which counts signalling events per second. The two agree only when each signal carries exactly one bit. Ten-megabit Ethernet over twisted pair, for instance, runs at 10 Mbit/s but sends about 20 million pulses per second because of its line coding. For scale, one cited figure puts the bare minimum for recognizable speech at around 800 bit/s, far below the 64 kbit/s of an ordinary digital phone line.

The bit per second is the reference unit for data transfer rate on this site.

Sources: Wikipedia: Bit (origin of the term); Wikipedia: Bit rate; Wikipedia: Baud

Mebibyte Per Second (MiB/s)

ComputingCurrent unit

1,048,576 bytes per second (8.39 Mbps). Used by some operating systems and storage tools.

Mebibyte is one of the newest words in computing. In December 1998 the IEC approved names for binary multiples, published in 1999 as an amendment to IEC 60027-2. Each keeps the first two letters of its SI counterpart and adds bi for binary, so mebi stands for 2²⁰. The aim was to stop mega meaning 10⁶ in telecommunications and storage but 2²⁰ in memory, a split that left room for incompatibility.

A mebibyte per second is 1,048,576 bytes per second, about 8.39 Mbit/s, so it is roughly 4.9 percent larger than 1 MB/s. Some operating systems and tools divide by 1,024 and then print the result with a plain MB label, so one program may show 11.9 for a transfer that another shows as 12.5. For example, a 100 Mbit/s link carries about 11.92 MiB/s at most. The IEEE chose to keep SI meanings in its own standards, allowing base-two use of mega only when explicitly noted.

1 mebibyte per second = 8,388,608 bits per second (exactly).

Sources: NIST: Prefixes for binary multiples; Wikipedia: Data-rate units; Wikipedia: Megabyte

Related conversions

See all data transfer rate units.