Terabytes to Megabytes (TB to MB)

1 terabyte equals 1,000,000 megabytes exactly.

1 terabyte = 1,000,000 megabytes

How to convert terabytes to megabytes

To convert terabytes to megabytes, multiply the number of terabytes by 1,000,000. This factor is exact. To go the other way, multiply megabytes by 0.000001.

megabytes = terabytes × 1,000,000

Example: 10 terabytes = 10,000,000 megabytes.

Decimal prefixes (kB, MB, GB) are powers of 1,000; binary prefixes (KiB, MiB, GiB) are powers of 1,024. Storage makers use decimal; Windows reports binary but labels it GB.

About these units

Terabyte (TB)

ComputingCurrent unit

1,000 gigabytes (10¹² bytes), the capacity of a typical modern hard drive.

Tera comes from the SI prefix for 10 to the twelfth, so a terabyte is one million million bytes. Computer memory is binary, so the prefixes were once used for powers of two, which caused confusion. IUPAC proposed binary prefixes such as kibi, mebi and gibi in 1995, and the IEC adopted them in December 1998 and published the standard in January 1999. The tebibyte is the binary counterpart, about 9 percent larger than the terabyte.

Hitachi introduced the first one-terabyte consumer hard drive in 2007. For scale, one terabyte is about 20 standard Blu-ray discs or 213 DVDs. The mismatch shows at this size: a drive sold as 1 TB may be reported as about 931 GB, because Windows uses the historic binary convention. macOS and iOS did the same until Mac OS X 10.5 Leopard and iOS 10, then switched to powers of 10.

1 terabyte = 1,000,000,000,000 bytes (exactly).

Sources: Wikipedia: Terabyte; Wikipedia: Binary prefix; NIST: Prefixes for binary multiples

Megabyte (MB)

ComputingCurrent unit

1,000,000 bytes (decimal). A typical MP3 song is 3–5 MB; a smartphone photo is 2–5 MB.

Megabyte started out as informal jargon. Base-1,024 usage grew because 1,024 is close to 1,000 and convenient for binary multiples. In 1999 the IEC standardized binary prefixes, assigning megabyte to 10 to the sixth bytes and mebibyte to 2 to the twentieth. By the end of 2009 the IEEE, the EU, ISO and NIST had adopted that standard, though the word still carries different meanings in practice.

The famous 1.44 MB floppy disk is a mixed case: it counts 1,024,000 bytes per megabyte, and it actually holds 1,474,560 bytes. Today most storage media and networking use the decimal definition, while Windows uses the binary one for memory such as RAM. For scale, a PlayStation 2 memory card held 8 MB, the plain text of Moby Dick runs to 1.192 MB, and one megabyte holds about one minute of 128 kbit/s MP3 audio.

1 megabyte = 1,000,000 bytes (exactly).

Sources: Wikipedia: Megabyte; NIST: Prefixes for binary multiples

Related conversions

See all digital storage units.